Honeywell FSL100-UV/IR Flame Detector

Honeywell FSL100-UV/IR Flame Detector - Estimated retail price

Long-lasting and reliable UV/IR light diffusion.

Critical areas where fires spread rapidly are a key concern for safety systems. The Honeywell FSL100UV/IR Flame Detector utilizes heat generated by combining ultraviolet (UV) and infrared (IR) radiation, along with a Microsoft-based signal monitoring system that signals alarm performance and prevents false alarms.

The FSL100 Series is ideal for Commercial and Light Industrial applications, especially for full-building areas with a wide 90° viewing angle and easy initial operation.

Key Features of the Honeywell FSL100UV/IR: High-performance UV/IR technology.

The FSL100UV/IR displays high-performance UV and IR radiation components ready for signal analysis to derive energy from various interference sources. Frequency...

The speed monitoring system and most microcontrollers continuously analyze signals and can provide detailed monitoring reports. The FSL100 Series data indicates alarm tracking times of 8–30 minutes, with detailed readings depending on the conditions and data frequency.

False message/warning analysis uses signals for efficient transmission, minimizing noise and providing continuous health monitoring for device status tracking with SelfTest functionality.

The FSL100 Series features Automatic SelfTest and supports manual testing, offering convenient explanations of internal structure performance and readiness.

Suitable for indoor and outdoor activities.

Made of Glass Reinforced Polyester (GRP), with IP65 protection rating and a typical operating temperature range of -40°C to +70°C, according to product specifications.

UV/IR Flame Detection Principle

Gas emits radiation in wavelength ranges visible to the human eye, such as UV and IR. The FSL100UV/IR uses a system to detect flames, allowing the system to analyze the received data to assess whether the signal is electromagnetic radiation.

The combined control of UV and IR allows the system to transmit signals from the majority of frequencies that are significant in radiation detection. 

Key Information

- Honeywell FSL100UV/IR

- Type UV/IR Flame Detector

- Ultraviolet + Infrared Sensor

- Viewing Angle 90°

- Detection Range approx. 80 ft.

- Operating Voltage 10–28 VDC

- Output Current 4–20 mA

- Protection Rating IP65

- Housing Glass Fiber Reinforced Polyester (GRP)

- Conduit M20

- Warm-up Time 10 seconds

- Operating Temperature -40°C to +70°C

- Mounting Rotating Mounting Bracket

- SPDT Fault Relay, 30 VDC / 2A, 60 W Max

- SPDT Fault Relay, 30 VDC / 2A, 60 W Max.

Actual monitoring duration and operating conditions depend on the size of the cause. Check the specifications in the product manual for data sheets for individual project system design. 

Honeywell FSL100 Series can be used effectively in areas requiring it, such as:

- Storage rooms

- Storage of flammable materials and substances

- Storage and handling of chemical materials

- Oil & Gas and pumping/transport stations

- Loading and unloading terminals

- Inspection

- Paint booths

- Storage or information related to hydrogen

- Energy industry

- Commercial messages exposed to fire

Honeywell identifies the FSL100 Series within a variety of hazardous areas, both Commercial and Light Industrial applications. The installation model and installation location should be evaluated based on the specific characteristics of the area.

Choose FSL100UV/IR?

Fast operation + signal monitoring + continuous status. The FSL100UV/IR is ideal as a flame detector. Easy to install and operate, with relay and 4–20 mA as standard, allowing monitoring of device operating conditions such as normal, alarm, and fault.

For more information on the FSL100 Series, please refer to related standards/articles such as EN5410 and FM3260, depending on the model and product description.

However,

The Honeywell FSL100 UV/IR Flame Detector is primarily for light-based systems requiring speed, reliability, and continuous device monitoring. It typically utilizes UV/IR, Microsoft signal transmission, automatic self-test, and is designed for both indoor and outdoor commercial applications.

This is to comply with Fire & Gas Detection Systems to identify fire incidents and assess safety levels in controlled plant and building areas.

Note: The selection of mounting location, control range, and typical feature levels is designed based on fire risk assessments, descriptions, documentation, and project requirements, primarily referencing the original Honeywell datasheet/technical manual.